1 Zone Sampler - BS1-INOX

Characteristics

Manufactured in 316L stainless steel.
One sampling zone manufactured in 316L stainless steel.
Total Length: 50cm.
Sampling Depth: 40cm.
Sampling Volume: 20cm3.

Uses

For grains, pellets or powder sampling.

How to use it

Make a cross­shaped cut on the bag with a flamed cutter. Put the sterilized sampler closed in the cross. Once sampling position is reached, turn handle to open the sampling zone. Return to close position by turning the handle again and remove the sampler. Close the cut made on the bag with a MicroSeal sticker.

1 Zone Sampler - BS1-IT

Characteristics

Manufactured in 316L stainless steel.
One interchangeable sampling zone manufactured in PTFE.
Total Length: 50cm.
Sampling Depth: 40cm.
Sampling Volume: 20cm3.

Uses

For grains, pellets or powder sampling.

How to use it

Make a cross­shaped cut on the bag with a flamed cutter. Put the sterilized sampler closed in the cross. Once sampling position is reached, turn handle to open the sampling zone. Return to close position by turning the handle again and remove the sampler. Close the cut made on the bag with a MicroSeal sticker.

3 Zones Sampler - BS3-INOX

Characteristics

Manufactured in 316L stainless steel.
Three sampling zones manufactured in 316L stainless steel.
Total Length: 900mm. 
Maximum Sampling Depth: 700 mm.
Sampling Volume per zone: 30 cm3.
Distance between sampling zones: 13 cm.

Uses

For sampling grains, pellets, powders, etc. in different sectors or depths simultaneously.

How to use it

Make a cross­shaped cut on the bag with a flamed cutter. Put the sterilized sampler closed in the cross. Once sampling position is reached, turn handle to open the sampling zone. Return to close position by turning the handle again and remove the sampler. Close the cut made on the bag with a MicroSeal sticker.

3 Zones Sampler - BS3-IT

Characteristics

Manufactured in 316L stainless steel.
Core of PTFE.
Three sampling zones.
Total Length: 900mm. 
Maximum sampling Depth : 700 mm.
Sampling Volume per zone: 30 cm3.
Distance between sampling zones: 13 cm.

Uses

For sampling grains, pellets, powders, etc. in different sectors or depths simultaneously.

How to use it

Make a cross­shaped cut on the bag with a flamed cutter. Put the sterilized sampler closed in the cross. Once sampling position is reached, turn handle to open the sampling zone. Return to close position by turning the handle again and remove the sampler. Close the cut made on the bag with a MicroSeal sticker.

4 Zones Sampler - BS4-IT

Characteristics

Manufactured in 316L stainless steel.
Core of PTFE.
Four sampling zones.
Total Length: 924 mm.
Maximum Sampling Depth: 724mm.
Sampling Volume per zone: 30 cm3
Distance between sampling zones: 13 cm.

Uses

For sampling grains, pellets, powders, etc. in different sectors or depths simultaneously.

How to use it

Make a cross­shaped cut on the bag with a flamed cutter. Put the sterilized sampler closed in the cross. Once sampling position is reached, turn handle to open the sampling zone. Return to close position by turning the handle again and remove the sampler. Close the cut made on the bag with a MicroSeal sticker.

Pickler Clar - PC–31625

Solid Sampler especially designed to sample products in bulk bags, bags or open drums.
The sample is collected directly within the sampling bags or bottles.

Characteristics

Manufactured in 316L stainless steel.
Sampling Depth: 25 cm.
Diameter: 2.5 cm.
Coil for round jars, approved health standards for the food, pharmaceutical and biological industries.

How to use it

Make a cut crosswise into the bag. Introduce the sampler into the bag. Withdraw the sampler. Use MicroSeal Sticker to close the bag and Microclar Sampling Bags to handle the sample.

Pickler Clar Polypropylene - PC–PP25

Solid sampler especially designed to sample products in bulk bags, or open bags.
The sample is collected directly within the sampling bags or bottles.

Characteristics

Manufactured in polypropylene.
Sampling Depth: 25 cm.
Diameter: 2.5 cm.
Round coil for jars, approved health standards for the food, pharmaceutical and biological industries.

How to use it

Make a cut crosswise into the bag. Introduce the sampler into the bag. Withdraw the sampler. Use MicroSeal Sticker to close the bag and Microclar Sampling Bags to handle the sample.

MicroSampling Sampler

Sampler for small quantities of powder designed in accordance with GMP and FDA standards.

Characteristics

Manufactured in 316L stainless steel.
Exchangeable sampling points for different volumes. It can be sterilized by flames.
3 Standard Lengths options:

• 50 cm long ­ BP­MM­50
• 100 cm long ­ BP­MM­100
• 150 cm long ­ BP­MM­150

Microseal - MS-250B

Stickers to close cut bags after sampling.

Characteristics

Can be written on in pencil, pen or marker.
Consists of three layers:

• Plastic sheet.
• Aluminum sheet.
• Paper.

Size: 90 x 90 mm
Presentation: 250 units

Uses

To close and protect the bags contents from contamination after sampling.

How to use it

Place the sticker over the cut made in sampling point.